1 / 8
Monitor Riser/ Stand II
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Simple Industrial Looking Monitor Riser/ Stand
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 82
- Makes
- 0
- Views
- 459
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
// NOTE: When first printing, print a few layers as a draft to ensure it fits nicely. I recommend making it the same layer height as the full print you plan to print; tolerances will change depending on layer height.
- I recommend a 0.2 or 0.16 layer height or lower to ensure the board fits.
- The stand is meant for a 7.25 in. x 0.75 in. board.
- They are 1 in. thick, and the thickness can be adjusted easily if needed. (Download the 1.5 in. profile, which is cut into three sections and should be able to be easily adjusted without warping.)
- The 4 holes are all 0.5 in.
- 4.51 in. tall in total.
- 3.50 in. tall underneath the board.
- 7.75 in. wide in total.
// If you encounter any problems, issues, or have suggestions for improvements, please leave a comment or message me directly, and I will do my best to respond and make changes. Thank You!!