M12 × 1.5 Threaded Lug Nut Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3D-printable replacement lug nut cap designed for vehicles that use M12 × 1.5 threaded lug nuts.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 34
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
This is a 3D-printable replacement threaded lug nut cap designed for M12 × 1.5 lug nuts (approx. 22.9 mm inner diameter). The model was recreated based on real measurements and is intended as a direct-fit decorative cover.
These caps are not load-bearing and are meant only as cosmetic protectors.
Printing Recommendations
Material: PETG or ABS strongly recommended.
Do not use PLA — it will soften and deform in hot weather, especially on a car exposed to the sun.
Layer height: 0.2 mm
Infill: 100% (for durability)
Supports: Not required
Notes
Thread pitch: 1.5 mm (fits M12 × 1.5 studs, very common across many vehicles).
Check your lug nut size before printing.
Designed for practicality and durability, not an exact OEM replica.