M12x1.25 - M20x1.5 Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter for Likewise shift knobs.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 79
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Internal thread is M12x1.25mm, with an M20x1.5 external threading. Fits on my ‘14 WRX, and really should fit anything with that threading size. It’s paired with my Lil' Oozy shift knob and fits perfectly. The nut is sized to 16mm or 5/8 in freedom units. I used ABS to print, due to being inside the car but PETG, ASA, Resin, or really anything strong/heat resistant should work.
Print Settings
Layer Height: 0.08mm
Initial Layer Height: 0.16mm
Seam Position: Random
Wall Loops: 999 (Better than 100% infill)
Top Shell Layers: 3 Layers
Bottom Shell Layers: 3 Layers
Infill: 0%
Support: None Needed
Filament: I used Orca's Generic ABS settings, and Elegoo Black ABS