Creality Sermoon S1 lens protector (usable while scanning)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted the lenses to be protected and the ability to lay the scanner front facing down. Et voila
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 75
- Makes
- 0
- Views
- 234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
My scan of the Sermoon S1 used for design: https://www.printables.com/model/1385022-creality-sermoon-s1-3d-scan-xyz-aligned
Also look at my other useful accessories for the Sermoon S1
The lens protector is designed to add a protective rim the the lenses of the Sermoon S1 and also to provide a flat base for laying down on the front. Protector is between 1,5mm and 2mm thick and should be printed from TPU.
This lens protector can be mounted with double sided adhesive tape (very thin one, design includes 0.1mm for the tape).
Protectors need to be printed from TPU for best effect. Orientation as in the STL.
Be aware:
The two protectors are not symmentrical. One is slightly higher → mount to higher lens-block