1 / 4
Oven mount sleeve
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sleeve for fixing built-in oven with screws
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
The strength of PLA is not enough (tested), so I used a PETG
I recommend printing horizontally.
Otherwise, the main load will be on the layers breaking, and the part will be fragile.
It may be difficult to fit into the target hole depending on the print quality, then try reducing the scale of the model slightly
Layer heigh is 0.1 for better accuracy and fitting
Infill: 100%
Outer diameter: 11 mm
Hole diameter: 5 mm
If you found my model useful, you can buy me a coffee