Prusa Heatbed Chill Plate/Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this plate/holder so I can rest and cool down the Heatbed Sheet after immediate removal from the Heatbed.
- Rating
- 4 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 1
- Views
- 409
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
You may harm your hands when holding a hot Heatbed Sheet immediately after removal. Also, if you place the hot sheet on furniture, the temperature may damage it. So I designed this plate/holder so I can rest and cool down the Heatbed Sheet after immediate removal from the Heatbed. You can use it on both sides.
How to use it
Lay the plate on the table (or any other surface you would like to protect), and quickly transfer the hot sheet onto it.
Printing
Make sure your first layer is on the spot and the print sheet is clean so that you can have maximum stickiness!
Printed in Prusament ASA, 15.00mm QUALITY. - 2h.25min. If you like, you can print it in PETG. I do not recommend PLA due to its lower temperature resistance.