1 / 1
Magnetic Duct Connection Window Mesh Passthrough for 150mm / 6 inch Hoses
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your 150mm duct against a window mesh.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 32
- Makes
- 0
- Views
- 435
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
2026/02 EDIT: I have uploaded a third file which is A+B joined together - if you are printing this (supports required), then you only need one more copy of part B for the outside of the window. This will save you having to glue it together.
You will need two Part Bs (one to glue to Part A on the hose side, one to mount on the other side of the mesh).
I only needed to exhaust the fumes in a not overly air-tight manner, and thus would not recommend this if you do need to more precisely control where your fumes are going.