Action LSC Smart Connect Plug Pogo Pins Jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a pogo pins jig for the Action LSC Smart Connect Plug . With this jig, you don’t need to mess around with…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a pogo pins jig for the Action LSC Smart Connect Plug . With this jig, you don’t need to mess around with soldering wires to the PCB to flash custom firmware. Just place the jig on the PCB, hook it up to an FTDI serial converter, plug that into USB, and run your flashing software. The jig also has a built-in microswitch that connects GND to the CEN pin, making it easy to reset the BKN chip and put it into flashing mode.
Tested with:
- action product code 3202087
- board CB2S
- chip BK7231N
Product page: https://shop.action.com/en-nl/p/8712879159025/lsc-smart-connect-plug
Wiring:
FTDI CB2S
VCC 3.3V
GND GND
RX TX
TX RX
Microswitch CB2S
Pin1 CEN
Pin2 GND
Related articles:
- https://www.elektroda.com/news/news4087228.html
- https://devices.esphome.io/devices/LSC-Plug-With-Monitoring
- https://keetsupport.nl/2024/03/20/how-to-flash-lsc-power-plug-with-esphome/
- https://tasmota.github.io/docs/devices/LSC-Smart-Connect-Smart-Power-Plug/
BoM:
- 1x FTDI FT232RL USB TTL Serial Adapter - Aliexpress
- 5x Pogo Pins P75-B1 - Aliexpress
- 4x Dupont Female Pins - Aliexpress
- 1x 6-Pin Dupont Connector - Aliexpress
- 1x Zip Tie 2,5x100mm
Wires Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
15%
Filament Material:
PETG
Category: Electronics