46 models
Summary This is a 3D-printable flasher pattern based on the work of Shannon Zirbel, Robert Lang, and several others. It demonstrates the ability of the flasher pattern to go from a flat state to a much more compact, folded state, all…
This case was designed for the xFlasher 360 (an all in one Xbox 360 NAND reader/writer) It was created with injection molding in mind so the tolerances are very tight. To print this you will need a high resolution SLA printer. For lower…
The ECO Throw Flasher replicates the natural "death spiral" of a wounded baitfish with a signature rotating and swimming action. Its engineered descent rate is intentionally slower than traditional flashers, giving you more time to…
A rocket shaped fish attractor that spins. Use with attractor tape on the fins. A flasher or dodger are commonly used when fishing for trout or kokanee. Most dodgers will wobble in the water, causing flashes of light as well as noise to…
This model is for a throw flasher holder for spear fishing. Internal diameter 20.5mm, sized to fit standard 20mm PVC tube with vinyl wrap. Designed to fit 50mm wide, 4mm thick dive belts.
What is this? Thickness accommodation is one of the most significant challenges in creating an origami flasher array. For rigid-panel arrays, the challenge is even more complicated. These models are examples of accommodation techniques…
This case was designed for the xFlasher 360 (an all in one Xbox 360 NAND reader/writer) It was created with injection molding in mind so the tolerances are very tight. To print this you will need a very high resolution SLA printer (4K…
Print in PETG or ABS. This model will not last very long in PLA. Model has rounded edges to eliminate line fraying Grommets to add strength ball bearing swivels for best performance…
I made a canopy flasher for the ASW15/20. Not fully finished. It is big because the lights from Aliexpre are very long. Lights I used:…
I have created this thing since I sometimes take video and make photo's at the same time. The hotshoe place is taken by the flasher and i had no way to attach my Rode Microphone. I created this thing to clamp around the ring of a Canon…
Display stand for Dx Ultra D flasher in Ultraman Decker series standard setting, suitable for even most basic setup like ender 3 layer height: 0.28 infill: 10% support: no
I made this case and diagrams for the PicoFlasher. Give it a whirl if you'd like. File for flashing the Pico Zero can also be found in this thread . You'll have to provide female pin headers, wires and get creative. I'm also on the…
Made this LED flasher bar dome mount for the Williams style twist on domes which can be found here . Bases are sold separately here . The bases press-fit into the model bottom and one the domes are on the top should snap right on over…
Small mount for the Arnoz Flash25 + Plug: https://shop.arnoz.com/en/classic-leds/88-flash25-plug.html and standard sized dome covers (I used these: https://www.ebay.com/itm/185366776213 ). Slot on the back is slightly tight for the plug…
Most salmon fenders are meant to simulate a school of fish by thrashing a big piece of plastic around during trolling. I'm not sure if the fish actually know, but it's unconvincing. This is meant to be a 3-or-more piece fender printable…
This is a 3D printable replacement for the stock dome flasher covers on a Stern Spike 2 Machine. This is specifically designed for Sterns Dungeons & Dragons Pinball machine but will fit any Stern machines with the same flasher cover…
Remix of "Canopy Flasher ASW15/20 by Kareltje" for Std Cirrus and bicycle light from china as donor led and reflector
(DONT USE IT, IT DOESNT WORK ANYMORE! WILL BE MAKING NEW VERSION) Yep, something new for something old... I created (with chatgpt ofc) Anycubic Mega Zero Klipper Firmware Flasher It's very simply just run a file and you are good to go!…
Many DIY microcontroller projects require to program / flash the uC (e.g. with a bootloader) before it is useable in the circuit. Smaller PCB often don't give the chance to access the uC chip at its ISP pins for flashing easily, so the…
This model is a vertical mount for the common 6 LED strobe flashers sold all over Amazon ( this is the exact one I used ). There are two versions of this design: One that holds a single strobe, and another that holds a strobe and a 4x12…
This rear indicator base is mounted on license plate holes (8,20mm), holes are 105mm apart. Flasher holes: Screw: 6,20mm Wire: 8,00mm Apart: 17,00mm Edit: 26.9.2018 Second versions has slots for wires, so there is no need to undo…
Simple housing for flashing tool for Arduino Pro Mini. Tested and printed on Prusa MK3S, CC3D Pink PETG.
Flasher can be found under this Link: https://amzn.eu/d/1qhwYLW
this mount is used for the LM449 blinker relay. in my car it is really difficult to remove the clip from the car so by using this i am able to replace these rather quickly without too much effort. this was installed in a 2017 WRX STI but…
This is a handy fishing storage aid for your boat. If you are using a drop weight / snap-on weight and a paddle flasher, you will love this add-on. Holds your bait, ball and flasher securely while you transit. Cut-outs also hold two…
Wat? Doobieflashers are small devices you can place on you Qi charger if you are not charging your phone. They use the energy transmitted from the Qi charger to flash two 5mm LEDs. They only contain a small copper coil - no batteries are…
DESIGN The Flasher Gnome is a playful and humorous 3D print model aimed at adding a touch of whimsy to any garden or home setting. USE This model serves as a decorative piece, intended for garden decor or as a light-hearted ornament…
Skadis mount for the Funnyplaying Portable Cart Flasher - BurnMaster https://funnyplaying.com/products/portable-cart-flasher-burnmaster
Pogo-Pin-Flasher-Adapter für SoluM ePaper-Tags Dieser 3D-gedruckte Adapter erleichtert das zuverlässige Flashen kompatibler SoluM-ePaper-Tags. Er positioniert die Pogo-Pins passgenau über den Kontaktflächen und verhindert ein Verrutschen…
Pillar warning beacon, to make sure that nobody will hit it:) I have created PCB design and sent it to JLCPCB for manufacturing it. Then i have solder some SMD components so it is small and should last mounted outside. I have inspired…
A housing for a flasher using an Ajax alarm system relay. The specific set used is the following: https://www.alarmsysteemexpert.nl/products/ajax-flitser-set-oranje This set consists of following components: - Jablotron DE06-12 - Solex 10…
A part used to mount a signal flasher (mostly) on to a vehicle body (see picture). Use TPU, TPE or other flexible material, keep holes on Z. Category: Replacement Parts
When flying out over deep water (obviously not a pool as picture) you can increase your chances for recovery with a Getterback locked to your Mavic Pro. The Getterback (available from their website ) is designed to release a float after…
This spacer serves the purpose of securely affixing a TRIXIE USB-Flasher to a dog collar or harness, especially when the silicone strap provided is too small for the intended fit. Designed for this kind of dog-light
When flying out over deep water (obviously not a pool as picture) you can increase your chances for recovery with a Getterback locked to your Mavic Pro. The Getterback (available from many sporting goods stores and Amazon ) is designed to…
A simple case for the Joey GG cart flasher. Print both top and base parts large flat surface down no supports required. Qty 2, M3x15mm (or 10mm) screws required to hold the case together. Qty 4 rubber stick on feet (optional) - I always…
I had some self contained 12v LED flasher units left over from an earlier project. They had a 4 wire interface, 12v+ (red), 12v- (black), flash select (yellow) and sync(white). This model uses one of those self contained flasher units to…
I built these backing plates so I could use double sided tape to mount a set of Linkitom LED flashers on a mower without having to drill holes. The backing plates get attached to the flashers using M4 cap head screws (8mm - 10mm). Reliefs…
Show off your passion for salmon fishing or keep a reminder of the river with you wherever you go! This is a mini 360-degree trolling flasher scaled down perfectly to serve as a standalone keychain fob, or bag tag. It captures the…
I bought a set of “ASPL 8pcs Sync Feature Ultra Slim 12-LED Surface Mount Flashing Strobe Lights” https://www.amazon.com/dp/B09DL6PYNX I wanted to mount them on a mower without drilling holes. These backing plates provide a mounting…
I have a 1989 Honda CRX Si. After installing LED turn signal bulbs, I ended up with the hyper-flashing issue. There are many compatible flasher relays available (like the one linked below), but I couldn't find any that fit the fuse box in…
These are flashers I made for my friend.
This is for a Syncrostat TF-3B. It allows you to remove the standard incandescent bulb fixture and attach an LED bulb to the flash driver. Not sure anyone will ever find any use for it, but I made it… so here it is. Printed .15 with…
Living in a rural area there are often broken down vehicles that end up on the side of the road for a couple days at a time, and especially as the autumn days get shorter, they can pose a bit of a hazard on narrow roads. To help increase…
I made this to replace the flasher holder on my 76 XL70, probably will work for other years. Printed in TPU, pretty simple, Measured best I could off of the original part that was pretty damaged.
This model is for a throw flasher holder for spear fishing. Internal diameter 20.5mm, sized to fit standard 20mm PVC tube with vinyl wrap. Designed to fit 50mm wide, 4mm thick dive belts.
