AI Dot Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Convenient mounts that can be placed anywhere allowing the camera to be moved around as needed.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU Lesser General Public License
Overview:
I have an AI Dot camera installed by my CNC, and had it mounted above and behind the machine. This was not optimal when doing 4th axis work as the spindle was always in the way. I created this mount, so I could move my camera to different viewing angles depending on the project. I have one mounted with screws above and behind the machine, and another one attached to the MASSO controller using double-sided tape. I can simply remove the camera from one mount and slide it into another.
The fit is snug, so the camera does not slide out on its own. I’ve included my Fusion 360 file if you need to fine-tune the fit.
Printing:
Print in nearly any material, but I just used PLA. If you print in the orientation shown, you may not need supports, but I added them to the sharp corners at the bottom. This is minimal and adds a little stability.