Doorlock and handle mount replacement for Eriba Touring Pan/Familia caravan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Doorlock and handle mount replacement for Eriba Touring Pan/Familia caravan
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In my old Eriba Touring Pan/Familia caravan the mount of the door handle (or spindle) which also acts as an actuator for the latch, broke and I needed a replacement. While measuring and modelling the replacement part for the spindle I also decided to replace the whole housing of the lock.
The orange part printed in PETG was only a test print because I later thought PETG may be to flexible for the final part. The final parts are all printed with Prusament PC Blend Carbon Fiber Black with 4 perimeters and 100% infill. To reassemble the parts I drilled a small hole in the spindle because its a total pain to remount the spring.
Make sure to print the spindle in the orientation like in the last picture for the best torsional strength. The housing can just be printed laying flat on the bed.