Spring Clamp Extender
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A long reach extension for the ubiquitous, medium-size, plastic spring clamps everyone seems to have.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 60
- Makes
- 0
- Views
- 281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A long reach extension for the ubiquitous, medium-size, plastic spring clamps everyone seems to have.
Allows the re-use of the clamp's original tilting pads. Assembly instructions included in one of the images, but straight forward enough. Pretty much just drift out the old pins, install the extenders, then install the original clamp pads with extra pins/nails/wire/whatever you have on hand.
If you care about looks, print one and then print another one mirrored so the surface finish is similar on each side.
I printed it on its side with minimal supports for the overhangs. Recommend at least 3 perimeters. PLA works fine, but PETG would be stronger.