Miniflight Bravo/WinCtrl Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.62 – €3.20 net (excluding VAT)
For file: MiniFlightsBracket_0.4n_0.2mm_PLA_COREONE_1h44m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.91 excluding VAT (range midpoint).
- Weight reported by the author
- 61 g
- Print time reported by the author
- 1.73 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Parts to attach the Miniflight FCU and EFIS to the Honeycomb Bravo Throttle and the WinCtrl Throttle Desk Mount 5
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 1
- Views
- 200
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
Two part bracket to attach the Miniflight MiniFCU and MiniEFIS to the Honeycomb Bravo.
You'll require:
Two M3x25 bolts and nuts, to attach the two parts.
Four M4x8 to attach the bracket to the Miniflight parts
Also Added a Second Support for the WinCtrl Throttle Desk Mount5. For this you require additional to the above:
2 or 4 M5 Channel Sprint T Nuts
2 or 4 M5x12 bolts
You can secure with just 2 bolts but 4 is more secure.