6" Diamond Lapidary Lap Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
13 Vertical Slot Organizer to store 6" diamond laps intended for Lapidary faceting and polishing.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 125
- Makes
- 0
- Views
- 317
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
No special print recommendations, clean build plate for good adhesion, mouse ears or brim if corners lift, 10% rectilinear infill for speed, doesn't require exceptional structural support.
With above settings approximately 600grams of filament needed.
Design available as a whole for those blessed with large enough volume
or
Split model available fits on MK3/4/CoreOne with snap connectors. Recommended using glue to permanent hold.
Designed to hold 13, 6" diameter, 1mm thick diamond plated laps. Features 20mm catch all tray for dops or whatever. Intended to hold an entire line up of laps required to go from roughing to high polish, 120/240/600/1000/1200/1500/2000/2500/3000grit + 4 Copper laps for final polishing (or some other combination).
Affiliate links below.