Arducam Case and Mount for USB Camera Module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tilting case with a base for the standard size Arducam USB Webcam
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 633
- Makes
- 2
- Views
- 2,930
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
I designed this case for an Arducam. I specificall used the B0200 camera ("Arducam 1080P Low Light WDR USB Camera Module for Computer, 2MP 1/2.8” CMOS IMX291 100 Degree Wide Angle Mini UVC Webcam Board with Microphone") Amazon/Arducam but it should fit any of their cameras with the same 38mm board with 34mm hole spacing.
There are a few file options. There is a tall version of the front piece which won't let you spin the focus ring. The short version the lens will stick out of the case a bit allowing you to adjust the focus. I also included a pair of exports for using a M3 bolt on the tilt base instead of M4 bolt. Personally I used an M4 bolt but either should work. I used velcro on the base to attach it to my project
Parts required:
- Four 16mm M3 bolts
- One 30mm M4 or M3 bolt.