FDG-Concept1 RC Car - 100 km/h+ FDM 3D Printed RC Vehicle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 1/8th scale RC racing car. Top speed of over 100 km/h. Minimum build volume: 220x220x180 mm, 0.4 mm nozzle.
- Rating
- 5 / 5
- Likes
- 27
- Makes
- 1
- Views
- 1,209
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Standard Digital File License
The FDG-Concept1, the fastest commercially available 3D printed RC Car. With 4 years of design and development behind, its design is truly tried and tested.
It is a rear-wheel drive, 1/8th scale monster and if you're brave enough, it can be pushed to over 100 km/h. Lightness and efficiency are the keywords: 1kg of PLA+ is enough to print the whole car.
It features a 360 mm wheelbase, entirely 3D printed chassis, and using topology optimization the weight was cut down to just 2.5 kg. But don't be fooled, this is not an empty weight of any kind, it's the full final weight with a 4S LiPo system installed. The same system which over 90 km/h, thanks to its CFD-optimized aero package, allows you to drive it upside down.
Because of it's racing DNA, with the 4S LiPo configuration shown, a 50/50 weight distribution can be achieved, maximizing its handling characteristics.
The ZIP file you get contains:
All the STL files to be printed
An instruction manual
STEP files to consult the dimensions of some additional components
Pictures showing recommended printing orientations
There are pieces that need to be bought and the instruction manual contains dimensions and links to buy all the necessary extra parts.
Most importantly though, the assembly process DOESN'T require any power tools, just some sandpaper, superglue, pliers and screwdrivers.
It can fit one motor up to 56.3mm (2.2 inches) in diameter and 112.7mm (4.4 inches) in length. The motor screw configurations which can be mounted are:
4 or 8 M3 screw holes, equally spaced out on a circumference with a diameter of 25 mm.
4 or 8 M4 screw holes, equally spaced out on a circumference with a diameter of 30 mm.
6 M3 screw holes, equally spaced out on a circumference with a diameter of 25 mm.
6 M4 screw holes, equally spaced out on a circumference with a diameter of 30 mm.
Any servo with 40×20×38 mm (standard size) dimensions will fit. In terms of battery and ESC sizes anything goes! There is no limitation as the space in the centre is always enough to supply a single motor.
It wouldn't be a true racing car if you couldn't tune its setup, therefore this model offers:
adjustable camber on each wheel
adjustable front and rear toe
adjustable load on every tire
fully independent, double wishbone suspensions with front anti-roll bar
adjustable differential and shocks
In the pictures shown there are many additional electronic components as an entire 4-wheel steering system was developed for this car as well, but we think that's a little too spicy to share with the world, at least for now. Don't be alarmed though, the classic front wheel steering setup will still shock you with its performance.
You can contact [email protected] for any questions or help.
So what are you waiting for? Whether you're a hardcore RC enthusiast, a 3D printing fanatic, or an adrenaline junkie, this model is ready to push your limits.
Your FDG-Concept1 awaits.
Update log:
19/02/2026: Improvement on design of all four suspension hubs
