1 / 2
Autodarts WLED backboard ring
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Autodarts WLED ring for effects through WLED-Darts and Darts-Caller.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 69
- Makes
- 0
- Views
- 1,186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Share Alike
Segments to be screwed to a darts backboard and underneath a dartboard protection ring. It provides a platform to mount a strip of WS2812 or similar LEDs so that through autodarts > darts-hub, one can see light effects based on what you have thrown in Autodarts games.
Ring has an outmost diameter of 615mm and you need 6 x segments printed and 12 small wood screws to attach to your dart backboard.
You will need a printer capable of 307mm prints as that is the max distance of the model.
Print upside down with supports for the screw-tabs.