1 / 4
Revopoint Trackit / Trackit SR Tripod Powerbank Mount for Ugreen Nexode 25000mAh — image 1
1 / 4

Revopoint Trackit / Trackit SR Tripod Powerbank Mount for Ugreen Nexode 25000mAh

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

To remove the need for an external powersupply I wanted to use my Nexode Powerbank. Therefore I created the mount

Rating
0 / 5
Likes
6
Downloads
51
Makes
0
Views
302
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Update: Also works with the Trackit SR

Scan used for design: https://www.printables.com/model/1413825-ugreen-nexode-25000mah-powerbank-scanhttps://www.printables.com/model/1413825-ugreen-nexode-25000mah-powerbank-scan

Usage

This mount is designed for the UGREEN Nexode 25,000mAh Powerbank.

The Trackit needs 12V and consumes while normal scanning usage roughly 25W and therefore an Powerbank or Power-Brick with 12V 3A output is sufficient. To get the 12V output from USB-C to barrel-jack such a cable can be used: https://de.aliexpress.com/item/1005006058252700.html?spm=a2g0o.order_list.order_list_main.24.51d91802JtIChz&gatewayAdapt=glo2deuhttps://de.aliexpress.com/item/1005006058252700.html?spm=a2g0o.order_list.order_list_main.24.51d91802JtIChz&gatewayAdapt=glo2deu (12V version needed!)

Beware: While performing calibration with the dual-axis gimbals the scanner consumes up to 60W. Original powersupply is used for this.

Mounting

The mount is secured to the tripod with 4 zip-ties and the powerbank can easily fixed with a velcro-strip. I used a velcro from my FPV-drone but other 20mm wide ones are suitable.

Even with the mount attached you can still close the case containing tracker and tripod (was a hard-requirement), to improve the fit simply swap places with the tripod used in calibration.

Printing

Best printed from TPU for imroved friction and protection, other materials should also be suitable (small double-sided tape may be needed to prevent slipping between mount and tracker).

 

Tags