1 / 3
Microphone Boom Arm Mount To Monitor Arm — image 1
1 / 3

Microphone Boom Arm Mount To Monitor Arm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Custom adapter to fit generic microphone arm mount to any pole monitor mount. 2-part design so the mic can rotate freely

Rating
0 / 5
Likes
6
Downloads
35
Makes
0
Views
384
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

A quick adapter to mount your generic Microphone stand like this one, to fit any 35mm Pole shaped monitor stand. Features sturdy cable clip for tidy setup!

Hardwares required:

  1. Any pole based monitor arm/mount system with diameter of 35 mm
  2. Basic microphone stand, with detachable C-clamp. The insides should be around 12 mm 
  3. M4x20mm Bolt, and M4 hex nut

Install instructions:

  1. Remove the C Clamp from the microphone mount
  2. Insert the locking clamp to the Monitor Pole, adjust the height accordingly
  3. Chuck your mic stand to the printed part
  4. slide the Adapter into the monitor pole

Notes:

  1. The adapter is designed to fit loosely on the monitor pole, so it can be moved freely
  2. The adapter is designed to fit tight on the microphone stand.
  3. Printed using PA-CF at 20% Infill. 4 shells, 4 solid fills. Should work with other filament as well
  4. Recommended print settings:
    1. 20% infill for the Mount adapter
    2. 50% infill for the locking clamp
    3. No Supports required!
       

Posted on 14 September 2025

Tags