1 / 3
☽ lamp ☼
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Hardware needed:
- E14 lamp holder and plug cord
- 8 bolts M4 min 5 mm length
- 8 threaded brass inserts M4 dimension
For the shade, I printed fine with only one perimeter and 0% infill to promote that light goes through, but also to avoid funny infill patterns showing up. Also, for both the base and the shade I painted manually the seam on the rear part where the cable goes out, so seams wont be visible.