Carvera Air Laser Exhaust Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement back plate for the Carvera Air, designed to hold a fan and hose for external exhaust.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Carvera Air Laser Exhaust Mod
This is a replacement back plate for the Carvera Air, designed to mount an 80×80 mm exhaust fan (available from AliExpress) with a duct for external ventilation. It helps reduce the smell produced when using the laser module, making it easier to work on projects without odor issues. The plate replaces the original pass-through plate and provides a clean, practical solution for improved airflow.
Included Models:
Split version – Prints in two parts (205 mm width each, with overlap) for easier printing on smaller printers.
Single-piece version – Prints as one solid piece (318 mm width) for larger printers.
Both versions are designed to fit perfectly in the back of the Carvera Air and accommodate the 80×80 mm fan and duct setup for effective exhaust.
https://nl.aliexpress.com/item/1005006499424283.html?gatewayAdapt=glo2nld#nav-specificationhttps://nl.aliexpress.com/item/1005006499424283.html?gatewayAdapt=glo2nld#nav-specification
Personal Note:
If printing with ASA or ABS, keep material shrinkage in mind. You can account for shrinkage by adjusting the percentage in your slicer settings under shrinkage compensation XY.