Fahrradlader V4.0 Clip-on Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Outer for the Fahrradlader V4.0 so it can be attached to the inside of your framebag!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Just bought a Fahrradlader V4.0 for your next Bikepacking trip? Here is a Clip-on Housing so you can attach it to the innerts of your framebag!
I made it so it sits nice and snug on the original housing (directly, without the label). This Clip can be mounted in all directions without blocking access to the charge-optimizing switch, status LED or I/O. If you want to keep the label just print it at about 102% scale. Fitment of course is down to your printers accuracy.
My samples were all made of PLA, i printed it "upside down" as shown on the last picture. Thereby you only need supports for the two cutouts. Prints even on my old Anycubic Mega S in less than 1 hour! Because of the mediocre Layeradhesion of PLA i strongly reccomend printing it in PETG or ABS for a more durable result!