1 / 3
cutter for k1 for the possibility of installing MMU — image 1
1 / 3

cutter for k1 for the possibility of installing MMU

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

knife for k1 for the possibility of installing MMU. cutter based on KKm and mellow magneto cutter

Rating
0 / 5
Likes
13
Downloads
43
Makes
0
Views
473
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

knife for k1 for the possibility of installing MMU. cutter based on KKm and mellow magneto cutter.

why did I decide to create my own cutter based on kkm? - It's simple, I didn't like the existing extruders with cutters that didn't have an adjustable clamp (with the exception of the orbiter b2-based cutter). I also didn't want to leave the stock extruder so that most of the audience could install the knife. I also adapted the mellow cutter for printing.

BOM:
All the gears and bearings from the stock extruder

  • 1x ECAS04 fitting
  • 2x M3 washers (1mm thick, only for stock K1 motor)
  • 4x MR84ZZ bearings
  • 6mm long piece of M2 screw (without head)
  • 2x 4x15mm pins
  • 1x tension spring
  • 1x M3x10 or longer SHCS screw
  • 3x M3x18 SHCS screws
  • 1x M3x20 FHCS screw
  • 7x M3 heat inserts (4.6mm-5mm outer diameter, up to 5mm length)
  • 2x M3x8 XMSJ (Flat head, not countersunk) (or x4, if you will use printable version of cutter)

 

 

 

Tags