Eye Guard for Eypieces
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a rubber eye guard for eyepieces of microscopes, telescopes or other optical instruments.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
A rubber eye guard for eypieces of microscopes, telescopes or other optical instruments.
My original design has an inner diameter of 28mm for the eyepiece, which fits perfect on my VEVOR stereo microscope eye pieces. Since eypieces have different diameters, you might need to scale it to fit yours. The eye distance, which is enforced by the height of this eye shields, is perfect for the WF 10x 18mm eye pieces in my opinion. I guess this is true also for other eye pieces of other microscopes on the various selling platforms. For the WF 25x eye pieces, a slightly smaller diameter is required, will try this soon.
I have printed it with JAYO TPU Black, 10% infill and Supports on my MK4S with selfmade enclosure - TPU stinks somewhat.
It was somewhat difficult to remove the supports from the inner of the eye guard. I guess this is due to the use of TPU 98A, which has different attributes from PLA or ASA and probably sticks better in Z-direction.
The eye guard is harder than the ones that you can buy on Amazon. I think this is not a bad thing, since my version with TPU 98A holds your head in a more stable position than more flexible TPU while it is still flexible and should not harm your body.