Schwenkbares Gehäuse für IR Beleuchtungs-Modul CENPEK 940nm mit 48 LED's - Pivoting housing for IR illumination module CENPEK 940nm with 48 LEDs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gehäuse für IR Beleuchtungs-Modul CENPEK 940nm mit 48 LED's Housing for IR illumination module CENPEK 940nm with 48 LEDs
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Um die Qualität der Nachsicht bzw. die Ausleuchtung für unser Babyphone (Momcozy BM03) zu verbessern habe ich bei Amazon um ca. 8€ dieses Infrarot Modul auf 940nm IR Basis gekauft.
-> https://www.amazon.de/dp/B09H72RDM7?ref=ppx_yo2ov_dt_b_fed_asin_title
Bei dem IR-Modul ist auch ein kurzes Anschlusskabel für eine 12V Versorgung mit einen Stecker für das Modul selbst und einer 12V 5.5mm Buchse dabei.
Da man das ja so nicht betreiben kann habe ich dieses einfache schwenkbare Gehäuse konstruiert.Bei dem Druck wird kein Support oder Rand benötigt.
Beim Ausdruck der Hauptbase musste ich in meinen Fall den Filament Extrusion Wert auf 0.92 verringern.Das von mir verwendete Filament und die Prusa 0.4mm HF Düse hat da bei den doch sehr dichten/vollen Hauptkörper zu viel Filament gedruckt was zu Problemen führte.
Mein benütztes Filament:
OVERTURE PETG weiß -> https://www.amazon.de/dp/B07PDV9RC8?ref=ppx_yo2ov_dt_b_fed_asin_title
Beim Deckel und der Deckel-Base die ich als erstes gedruckt habe hatte ich mit dem Standart
Extrusion Wert von 1 aber kein Problem...wäre aber vielleicht auch besser mit 0.92 gewesen...
Für mein konstruiertes Gehäuse benötigt man noch:
4x Senkkopf Schrauben M3x10mm (Deckel)
2x Senkkopf Schrauben M4x12mm (Hauptbase)
2x M4 Sicherungsmutter (Hauptbase)
1x Kabelbinder 2,5mm breit
optional 4x M5x16mm (Hauptbase)
Die 4x M3x10mm Senk-Kopf-Schrauben können direkt in die gedruckten Löcher des Deckels geschraubt werden.
Das Anschlusskabel wird einfach mittels eines 2,5mm Kabelbinder an der Montage-Aufnahme an der Deckel-Base fixiert.
Anschließend wird dieses Kabel einfach nur in den Schlitz der Hauptbase gedrückt.
Der Deckel mit eingebauten IR-Modul wiegt ca. 50g
Damit gewährleistet ist, dass die Haupt-Base mit ausgeklappten Deckel mit dem IR-Modul sicher und stabil steht, habe ich im Prusa-Slicer mit Hilfe von Modifier Körper & Infill das Gewicht der Hauptbase auf rund 100g erhöht. Weiters habe ich die Haupt-Base mit variabler Schichthöhe gesliced. Qualitäts-Wert 0,5
In der Haupt-Base befinden sich unten auch vier M5 Gewindelöcher mit Senkung um für etwaige zusätzliche Montage/Befestigung Szenarien gewappnet zu sein.
Oder einfach nur um das Gewicht der Haupt-Base um die 4 Schrauben zu erhöhen.
Der Abstand der M5 Gewindelöcher beträgt 65mm und 50mm
Für die Stromversorgung und 12V Kabelverlängerung habe ich bei Amazon noch folgendes gekauft:
- 12V 2A Netzteil -> https://www.amazon.de/dp/B08MFP5Y4V?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
- 2m 12V Kabel-Verlängerung -> https://www.amazon.de/dp/B07WZFNKL6?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Die Ausleuchtung für die Nachtsicht ist mit diesen IR Modul im sehr dunklen Raum nun für uns ausreichend gut
und das Babyphonebild wirklich wesentlich besser und immer scharf.
(beleuchten von oben von der Kasten-Oberkante)
Das Licht der LED's mit 940nm ist komplett unsichtbar...stört also nicht
Happy Printing!
English:
To improve the quality of the night vision and the illumination for our baby monitor (Momcozy BM03),
I bought this 940nm IR-based infrared module from Amazon for around €8.
-> https://www.amazon.de/dp/B09H72RDM7?ref=ppx_yo2ov_dt_b_fed_asin_title
The IR module also comes with a short connection cable for a 12V power supply, with a plug
for the module itself and a 12V 5.5mm socket.
Since it can't be operated as it is, I constructed this simple pivoting housing.
No support or border is required for printing.
When printing the main base, I had to reduce the filament extrusion value to 0.92.
In my case, I had to reduce the filament extrusion value to 0.92.
The filament I used and the Prusa 0.4mm HF nozzle printed too much filament on the very dense/full main body, which caused problems.
My filament used:
OVERTURE PETG white -> https://www.amazon.de/dp/B07PDV9RC8?ref=ppx_yo2ov_dt_b_fed_asin_title
With the lid and the lid base, which I printed first, I had no problems with the standard
extrusion value of 1...but perhaps 0.92 would have been better...
For my designed case, you will also need:
4x M3x10mm countersunk screws (cover)
2x M4x12mm countersunk screws (main base)
2x M4 lock nuts (main base)
1x 2.5mm wide cable tie
optional - 4x M5x16mm (main base)
The 4x M3x10mm countersunk head screws can be screwed directly into the printed holes in the lid.
The connection cable is simply secured to the mounting slot on the lid base using a 2.5mm cable tie.
This cable is then simply pushed into the slot in the main base.
The lid with the built-in IR module weighs approximately 50g.
To ensure that the main base with the lid extended and the IR module is secure and stable,
I increased the weight of the main base to approximately 100g in Prusa Slicer using the Body & Infill modifier. I also sliced the main base with variable layer heights. Quality value 0.5
The main base also has four countersunk M5 threaded holes at the bottom to accommodate
any additional mounting/attachment scenarios.
Or simply to increase the weight of the main base by the four screws.
The spacing between the M5 threaded holes is 65mm and 50mm.
For the power supply and 12V cable extension, I also purchased the following from Amazon:
- 12V 2A power supply -> https://www.amazon.de/dp/B08MFP5Y4V?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
- 2m 12V cable extension -> https://www.amazon.de/dp/B07WZFNKL6?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
With this IR module, the illumination for night vision is now sufficient for us in very dark rooms.
and the baby monitor image is significantly better and always sharp.
(illuminated from above, from the top edge of the box.)
The 940nm LED light is completely invisible...so it doesn't interfere.
Happy Printing!