1 / 2
Lampshade L-C-2-150 [vasemode]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Geometric lampshade suitable for regular E14 or E27 sockets. Vasemode
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 20
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Geometric lampshade, compatible with regular E14 or E27 sockets. Files include a version for E14, E27 or a combination where the E14 hole can be broken away to yield an E27 hole.
150mm height, ~140mm width. Fits a Bambu A1 Mini. Tested on A1, A1 Mini; rPLA, rPETG.
For clean results best printed:
- in vasemode
- with a 0.6mm nozzle
- 0.67mm outer wall extrusion (high extrusion is necessary because of overhangs)
Alternatively, in lack of a 0.6mm nozzle:
- simply overextrude at 0.67mm
- or use “poor person's vasemode”:
- → 2 outer walls at 0.42,
- →no infill,
- → 0 top surface layers
- → scattered seams
- slower and less clean, so not suitable for mass production, but fine for one-off printing
Looks nice printed in translucent filaments.