ATMOS Knob 6mm – náhradní díl / replacement part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement knob for ATMOS device. Easy to print, 6mm D-shaft compatible, scale in slicer if needed.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Náhradní knoflík pro zařízení ATMOS. Model je určen jako jednoduchá a funkční náhrada za původní díl.
Otvor je přizpůsoben pro hřídel 6mm s ploškou (D-shaft), takže stačí jen nasadit a používat.
Replacement knob for ATMOS device. Designed as a simple and functional substitute for the original part.
The hole is adapted for a 6mm D-shaft, just push it on and it’s ready to use.
Doporučený tisk / Print settings
Materiál / Material: PLA or PETG (PETG recommended for durability)
Výška vrstvy / Layer height: 0.2 mm
Výplň / Infill: 20–30 %
Perimetry / Walls: 3
Supports: not required
Orientace / Orientation: print flat side down
Pokud má vaše zařízení jiný průměr hřídele, může být potřeba upravit model – jednoduše zvětšit nebo zmenšit ve sliceru.
If your device has a different shaft diameter, you may need to adjust the model – simply scale it up or down in your slicer.