1 / 8
Minimalistic coffee filter holder with clamping function.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This minimalistic holder fixes the coffee filters neatly to the side using a clamping function.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a holder that could fix the coffee filters to the side, regardless of the number of filters left.
It should also require only a small amount of filament.
This is achieved by clamping them to one side using the spring force of the s-shaped arm.
Only 20 grams of filament needed.
Printing:
- Nozzle: 0.4 mm
- Layer height: 0.2 mm
- Supports: none (built-in)
- Filament: PETG
Assembly:
- Remove the built-in support using a flat headed screwdriver.
- If necessary, also remove any filament drops and strings.
- Place the clamp arm in the slot by twisting the flat body using a little force and insert it into the slot (see pictures).
- Press the flat body into the front side and make sure that the body is flush both at the front and rear side of the slot.
Mount;
- Place the filter holder flat on a surface or fix it to the side of the cabinet using screws or double sided tape.
Note:
- The model was intended to be placed to the left of the cabinet. If you prefer the opposite, you can just mirror the model in the slicer.