1 / 2
Sovol SV08 Klipper Rail + Z Screw Lube Spreading Macro — image 1
1 / 2

Sovol SV08 Klipper Rail + Z Screw Lube Spreading Macro

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

One-click Klipper macro to sweep XY and Z to spread lubricant after maintenance; safe defaults and overridable params.

Rating
0 / 5
Likes
8
Downloads
26
Makes
0
Views
316
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

DISCLOSURE, I USED AI TO WRITE THIS BUT ITS AN IDEA THAT I HAD AND I ALSO TWEAKED AND PERFECTED IT FOR THE SOVOL SV08

Klipper LUBE_CYCLE — Rail & Z-Screw Lubricant Spreader

One-click Klipper macro to sweep XY and cycle Z to spread lubricant evenly after maintenance.

Safe bounds (auto-clamped to your configured bed size)

Tunable via parameters (XY_SPEED, Z_SPEED, XY_REPS, Z_REPS, SETTLE_MS)

No model required — just run the macro

✅ Requirements

Klipper firmware with a homed printer

Empty bed / clear toolhead path

📦 Install

Copy the macro from LUBE_CYCLE.cfg to your sovol_macro.cfg. 

Alternatively just add the LUBE_CYCLE.cfg to your config directory and call it by adding [LUBE_CYCLE.cfg] in your printer.cfg

RESTART Klipper.

▶ Usage

Run from the console or a macro button:

LUBE_CYCLE                              ; defaults

 

LUBE_CYCLE XY_SPEED=250 XY_REPS=5       ; faster XY, more sweeps

 

LUBE_CYCLE Z_SPEED=6 Z_REPS=4 SETTLE_MS=150

 

Parameters

NameUnitDefaultWhat it does
XY_SPEEDmm/s200XY travel speed
Z_SPEEDmm/s10Z up/down speed
XY_REPS—3Number of XY sweep loops
Z_REPS—2Number of Z cycles
SETTLE_MSms300Dwell between moves (settling)

Tip: Start with defaults after fresh lubrication. Increase speeds gradually if desired.

🧠 Notes

Movements are automatically clamped to your configured bed size/limits.

Works on CoreXY and Cartesian; Z-hop patterns avoid hard end-stops.

Safe to re-run multiple times after applying lube.

⚠ Safety

Clear the build plate and keep hands/tools away during motion.

Do not run while printing.

If anything sounds rough, stop and check for mechanical issues.

EVERYTHING IS IN AutoLube.zip

 

📄 License

Released under CC BY 4.0 — credit appreciated when sharing/remixing.

Tags