Sovol SV08 Klipper Rail + Z Screw Lube Spreading Macro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One-click Klipper macro to sweep XY and Z to spread lubricant after maintenance; safe defaults and overridable params.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
DISCLOSURE, I USED AI TO WRITE THIS BUT ITS AN IDEA THAT I HAD AND I ALSO TWEAKED AND PERFECTED IT FOR THE SOVOL SV08
Klipper LUBE_CYCLE — Rail & Z-Screw Lubricant Spreader
One-click Klipper macro to sweep XY and cycle Z to spread lubricant evenly after maintenance.
Safe bounds (auto-clamped to your configured bed size)
Tunable via parameters (XY_SPEED, Z_SPEED, XY_REPS, Z_REPS, SETTLE_MS)
No model required — just run the macro
✅ Requirements
Klipper firmware with a homed printer
Empty bed / clear toolhead path
📦 Install
Copy the macro from LUBE_CYCLE.cfg to your sovol_macro.cfg.
Alternatively just add the LUBE_CYCLE.cfg to your config directory and call it by adding [LUBE_CYCLE.cfg] in your printer.cfg
RESTART Klipper.
▶ Usage
Run from the console or a macro button:
LUBE_CYCLE ; defaults
LUBE_CYCLE XY_SPEED=250 XY_REPS=5 ; faster XY, more sweeps
LUBE_CYCLE Z_SPEED=6 Z_REPS=4 SETTLE_MS=150
Parameters
| Name | Unit | Default | What it does |
|---|---|---|---|
| XY_SPEED | mm/s | 200 | XY travel speed |
| Z_SPEED | mm/s | 10 | Z up/down speed |
| XY_REPS | — | 3 | Number of XY sweep loops |
| Z_REPS | — | 2 | Number of Z cycles |
| SETTLE_MS | ms | 300 | Dwell between moves (settling) |
Tip: Start with defaults after fresh lubrication. Increase speeds gradually if desired.
🧠 Notes
Movements are automatically clamped to your configured bed size/limits.
Works on CoreXY and Cartesian; Z-hop patterns avoid hard end-stops.
Safe to re-run multiple times after applying lube.
⚠ Safety
Clear the build plate and keep hands/tools away during motion.
Do not run while printing.
If anything sounds rough, stop and check for mechanical issues.
EVERYTHING IS IN AutoLube.zip
📄 License
Released under CC BY 4.0 — credit appreciated when sharing/remixing.
