Snowsky Retro Nano Case (For use with Bigger battery)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snowsky Retro Nano case with slot for external battery.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 490
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
This is my first real creation with modeling so there can be some issues and is not perfect but it works for me.
It has been a while since i printed and put it together but if i remember correct the parts i used were the following.
A Single 3.7v 1500 mah Battery with the dimensions: 50 x 35 x 8mm.
4 Threaded Inserts with the dimensions: M2.5x4x3.5
4 M2.5x4 Countersunk mechanical screw.
Keep in mind you only need 1 Main body printed, and use a filament that is suited for higher temps than PLA.
also its a bit of a tight squeeze with the audio jack since it has a bit of an edge but it fits for me with a bit of fiddling.