Tetris Fridge Magnets 5x3 magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tetris shapes designed as magnets for the fridge
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Fidget with the most fun fridge magnets around while you wait for the food to cook or the coffee to steep.
The Tetris blocks have magnet holes for 5x3 magnets (actual size 5mmx2.8mm). I chose the smaller magnets rather than what the original creator used is because I can print them easier FACE UP. The sag from the bridge is better at this short distance AND I had a ton of these small magnets sitting around from a tic tac toe game project.
They come out looking way nicer printing face UP, trust me! You can even choose to pause the print and insert the magnets right before it prints the bridge. But I found it didn't come out any better this way.
A small dab of glue CA Glue/Super Glue/Krazy Glue and press the magnet into place. I only use 2 of the holes per piece. I typically use the same holes across the same pieces, unless one of the holes came out whacky.
My Print Settings:
- Material: PLA
- First layer height: 0.3mm
- Layer height: 0.2mm
- Wall thickness: 0.6mm (use .4 with a .4 nozzle)
- Wall loops: 2
- Wall order: Outer/Inner
- Wall generator: Arachne
- Bottom surface pattern: Rectilinear
- Top surface pattern: Concentric
- Bottom shell thickness: 0.7mm
- Top shell thickness: 0.8mm
- Infill density: 35%
- Infill pattern: Adaptive Cubic
- Nozzle size: 0.6mm (You can use 0.4mm, but recently I print most things with 0.6 - See video by Thomas)
- Supports: no
- Speed: You decide based on your printer! I like to print them on the slower side (45mm for walls 80mm for infills/gap/etc).
I like to print 3 or 4 per plate and use Print sequence: BY OBJECT. This way it prints it one pieces at a time.