Parameteric Door Bezel / fitting (OpenSCAD Model)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bezel for a door. The model is fully parametric -- load it into OpenSCAD and fully adjust it to fit your door!
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 0
- Views
- 55
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v3.0
I needed a base to mount my future DIY door lock, so I started with a replacement bezel to not break the original one. Like most of my models, this one's a fully parametric OpenSCAD model. All parameters are described in the OpenSCAD customizer when you load the model:
I've also added an example rendering (STL) so you can preview it here.
Before you print this, I recommend to measure the dimensions in the slicer and take your printer's quirks into account. Mine, for example, will always add 0.1mm to any perimeter, so I've added 0.2mm to the outside dimensions.