voron trident k1 camera mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
top mount 2020 extrusion camera mount
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 36
- Makes
- 1
- Views
- 450
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
i wanted something to mount the k1 camera inside my vorons so i designed this mount to connect to the top of the printer extrusion to ensure the camera was out of the way for monolith awd.
the k1 camera is 1080p 30fps and can handle a 70c chamber once a heatsink is stuck on it, its also a standard usb camera and works with the pi cm5 without any issues.
you can use a tmc2209 heatsink on the camera chip.
mounting re-uses the stock screws, a single m3 t-nut and an m3x8.
printed facing camera side down with 0 supports.
required bom:
m3x8 shcs x1
2020 series m3 roll in t-nut x1
camera cable (double check the pinout, check pictures)
Creality k1 camera
tmc2209 heatsink (optional)
please keep in mind the camera pinout, the cable listed will likely ship with the incorrect pinout. it should match this:
as a final request for anyone remixing stuff, please post the cad file (preferably a .step file) so others can also edit to suit their needs <3