1 / 5
WLED matrix 8x10
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
WLED matrix 8x10 using WeMOS D1 mini
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Hey there!
I designed my own 8X10 LED matrix.
I wanted to give it a DIY look, so there is no backplate to hide the wires and the WLED board.
I'm using:
- WeMOS D1 mini to control the LEDs
- LED 60 LEDs/m WS2821B 5V
The control box is glued in place (in case you are using a different box) and held with double-sided tape.
Four M3x16 screws are needed to close the box.
I use WLED to control the LEDs. Let me know if you would like me to upload the 2D matrix configuration.
You need to print "feet" 2 times. It helps the box to stand.