1/2 PVC to FEIT ELECTRIC Smart Colour Chasing Strip Light (19.7FT) Control Box Holder/Container
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Control Box Holder/Container holding on 1/2 PVC for FEIT ELECTRIC Smart Colour Chasing Strip Light or similar.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This model helps to attach the controller box for strip lights to a half-inch PVC pipe. To connect the PVC connector to the container, I recommend using PVC cement. For attaching the PVC connector to the PVC, I also recommend using PVC cement. This also makes the controller box semi-weatherproof. The cylinder inlet allows a DC 5.5mm x 2.1mm connector to fit through to the control box, and then on the other side, it allows a USB-C connector to connect to the LEDs. When connecting the DC hat onto the box, it simply clicks into place when giving it a good push and should stay. Enjoy! :)
