Umarex NOTOS Suppressor Sleeve - Threaded Barrel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sleeve to go over OEM suppressor on an Umarex Notos air rifle. Adds 5/8 x 24 threads to the end of the barrel.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 60
- Makes
- 0
- Views
- 915
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Sleeve to go over OEM suppressor on an Umarex Notos air rifle. Adds 5/8 x 24 threads to the end of the barrel. Included air stripper cap and blank thread protector. They are plastic threads, so be careful. I added a tiny bit of silicone grease to the fine threads and it seemed to work very well. The air stripper did seem to quiet it down a bit, but that might be phycological. I just think the whole thing looks kind of cool. My print had fuzzy skin inside the sleeve, so I had to sand it of before I could get it to fit. It is a tight fit since friction is all that holds it on. My original was printed in one piece , but I also included a cut and threaded version so it could be printed easier.