Umarex NOTOS Suppressor Sleeve - Threaded Barrel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sleeve to go over OEM suppressor on an Umarex Notos air rifle. Adds 5/8 x 24 threads to the end of the barrel.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 915
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sleeve to go over OEM suppressor on an Umarex Notos air rifle. Adds 5/8 x 24 threads to the end of the barrel. Included air stripper cap and blank thread protector. They are plastic threads, so be careful. I added a tiny bit of silicone grease to the fine threads and it seemed to work very well. The air stripper did seem to quiet it down a bit, but that might be phycological. I just think the whole thing looks kind of cool. My print had fuzzy skin inside the sleeve, so I had to sand it of before I could get it to fit. It is a tight fit since friction is all that holds it on. My original was printed in one piece , but I also included a cut and threaded version so it could be printed easier.