1 / 5
Biohort rotary lock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rotating locking mechanism for the second door of the Biohort Europa shed.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Rotating locking mechanism for the second door of the Biohort Europa shed.
Infos
- simple design - only two printing parts
- 90° angle of rotation
- seamless design, no visible fasteners or screws
- easy adhesive mounting to the inside wall of the door panel
Assembly
- Use a simple countersunk screw (e.g. M3x25) to connect both printing parts
- 2x aluminum poles, 5-6 mm diameter, approx. 1000mm lenght
- bending of the poles: bend one end similar to the original door lock. I recommend heating the tip of the rod first and then carefully beginning to bend it
- Is there an alternative to bending? Do you have a 3D printer? Congratulations ... You can print a suitable adapter!
- Only cut the straight ends of the poles once you have finalized the position of the handle. The length depends on your handle attachment point!
- glue the base of the lock with adhesive mounting tape. Insert the rods before final attachment
- use support for the overhanging wings!
- flat wings are important to ensure good rotation of the bended rod hooks
- use ASA or other heat resistant printing material - the shed can get hot in summer time!
