Diggs Dog Crate Google Nest Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.86 – €1.05 net (excluding VAT)
For file: Diggs_Camera_Mount_B_0.6n_0.2mm_PLA_MK3S_48m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.96 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 48.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Attach your camera to the crate's diamond mesh for an unobstructed view.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After we started crating our dog, we found ourselves constantly adjusting the camera to get a clear view of her while we were out. I designed this mount for the Google Nest home camera, which screws together in two halves and attaches securely to the crate’s diamond grid pattern.
Ours is mounted on the top since it stays most out of the way. If you’re attaching it to a side panel, keep in mind the camera can only rotate so far before the video becomes angled. I may create an alternate bracket version in the future to help with that.
Additional parts needed:
- (x2) #6 cabinet hinge screws
Prusa MK3+ print settings:
- 0.2mm layer height
- 0.6mm nozzle
- 10% infill
- Polymaker Panchroma (PolyTerra) PLA Matte White Filament
If you're a fan of this design, please consider supporting me by leaving a tip!