PRUSA MK3.5S MK4 Front panel for OSOYOO DSI 3.5" touch lcd screen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed MK3.5 panel integrating LCD & 3.5" DSI touchscreen for OctoPrint, compact, clean, no extra feet needed.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom Front Panel for Prusa MK3.5 with OctoPrint & Touchscreen Integration
I loved the idea of combining OctoPrint with a touchscreen user interface, but I couldn’t find any front panel design that accommodates both displays.
Since I’m upgrading my MK3S to an MK3.5, I decided to remix my previous front panel design to make it work with the new setup.
As with my earlier design, I wanted the Raspberry Pi to be mounted separately — typically placed above the Buddy board.
To achieve this, I chose to use the DSI interface, which allows me to connect a touchscreen via a DSI ribbon cable. This setup offers several advantages:
It decouples the screen from the Raspberry Pi.
It keeps the GPIO pins free.
DSI screens are typically plug-and-play, making setup easier.
For the display, I selected the OSOYOO 3.5” touchscreen with a DSI interface:
👉 OSOYOO 3.5” Touchscreen V3.0
However, I quickly realized that I couldn’t use a standard ribbon cable — the screen requires one from the same supplier.
Since my Raspberry Pi is positioned some distance away from the control panel, I had two options:
Buy a longer ribbon cable from the supplier, or
Use a DSI/CSI extender so I could use any standard cable.
I chose the second option and ordered this Adafruit extender:
👉 Adafruit CSI/DSI Cable Extender Board
Design & Assembly
Starting from the original XLCD R3 panel, I extended it to the left and created a slot for the touchscreen.
To make the setup more compact, I replaced the 11 mm hex spacers supplied with the screen with 5 mm brass hex spacers and 4 mm M2.5 screws.
The mounting supports are now integrated directly into the panel design — so there’s no need for larger printer feet to fit the panel.
Cable management follows the same route as the original LCD ribbons, keeping everything neat and tidy.
If you’d like a two-color print, the design files also include the MK3.5 lettering separately for easy dual-extrusion printing.
Bill of Materials
OSOYOO 3.5” Touchscreen (DSI interface)
Product link
CSI/DSI Extender Board – Adafruit #3671
M2.5 Hex Brass Spacers (5+4 mm, male-to-female)
Included with the Raspberry Pi heatsink shield I use:
Amazon link
Long DSI/CSI Cable (length as required)
4× M3 × 6 mm screws
4× M2.5 hex nuts
2× M2.5 × 6 mm screws for the DSI extender (optional)
2× M2.5 nuts for the DSI extender (optional)