Counting matching models…
Popandsicle’s Master Sword is totally genius. The sword prints without supports, doesn’t require glue, and looks amazing. Plus, it’s free! However, the original model is designed so that all pieces fit on a Prusa Mini. This is really cool…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Clodsire, Tabletop DnD miniature 50 mm Large base which can be used for DnD and other Tabletops.
Keep your phone within arm's reach — no nightstand needed. This bedside phone holder hooks securely onto your bed frame and holds your phone upright in a sleek honeycomb pocket. Grab it in the dark, charge it overnight, done. Fully…
No longer needing anything in Slot-1 of any of my Nintendo DSs, I wanted something stopping pocket lint from entering the device. This dummy cartridge does the trick. Category: Video Games
Just print the parts and glue together (I used superglue and activator). Then paint to your liking. I also added 3 leds on top of the billboard for added effect. Painted it with regular acrylic paint from an art store. @JamesHofmann_76667…
If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…
I needed a simple stand for an additional Home Assistant Raspberry Pi kiosk I am adding to my home – so I whipped this up. You’ll need some 2.5mm screws for assembly (I used socket head cap screws). Add some rubber stick-on pads to keep…
I designed this organizer to sit on a bedside table, to hold a phone, a smart watch charger, an e-reader, and with a small drawer for things like earplugs, chapstick, etc… The caddy itself is 6.75" deep, 5" wide, and 2.625" tall. The…
The SeedSigner PiP-Pill is a compact case with a print-in-place hinge and a very comfortable user experience. This compact enclosure makes use of the smaller “ zerocam ”, making it small enough to fit in any pocket. The trackball,…
Thank you to everyone who made this possible <3 Here it is, the Rugged Pill SeedSigner case. Single extruder and MMU Versions included. Print the Thumbstick and Buttons from TPU (98A) for the best handling experience. For the MMU version,…
An universal stand for handheld consoles PSP, Vita, DS, DSi, WonderSwan, CD, DVD, Famicom disks... I balanced it to be very stable and most handhelds consoles should fit, and many other things…
comfort grip for DSi XL 9.1 is currently untested but should help prevent the rubber feet from being worn down
I designed this so my kids could have a cupholder right next to their bed without having to have a table there. I designed the dimensions to clip onto their bed frame. It would be an easy remix or re-scaling to get it to fit your bed…
📺 Raspberry Pi 5 Case for Waveshare 10.1" DSI Display (Landscape Mode) This is a custom 3D-printed case designed for the Waveshare 10.1-inch DSI touchscreen display , configured in landscape orientation . It also houses a Raspberry Pi 5…
Chess Dubrovnik Set - mod easy to print Kingsize 3.86" (for a board with 58mmx58mm fieldsize) Chess #Dubrovnik #Staunton /////////////////////////////////////////////////////////////////////////////// The set - except of the knight - is a…
He's soooooooo cute, look at him flop around. (Hat not included)
I like this Nintendo DS lite stand from @baumesfab31as it's really fast to print and save a lot of material. However I prefer embossed design as it looks better in low-end FDM printer when printed in multicolor. Thus, I redesigned from…
Hi, this is a bed-side phone shelf nothing else, enjoy
Hanging jellyfish planter for Tillandsia. Used print settings Part 1 0.20mm, Prusament PVB (Blue Transparent / Natural Transparent) Infill: 0%, Perimeters: 2, Solid layers: 0 (top and bottom) Part 2 0.15mm, Prusament PLA Galaxy Silver
A set of faceplates, a digital cross, a joystick, and a pad for the popular SeedSigner ( https://seedsigner.com/ ) Open Pill case. Print the faceplates with the face down on the print bed. The pins match the bores of the WaveShare 1.3"…
I remixed the original model and made some personal improvements. add printed threads for the M3 screws increase size of the screw holes increase clearance for the Raspberry Pi 4 USB and ethernet ports change front case to mount the…
This is a case I designed for Raspberry Pi with Waveshare 4.3 inch LCD module which makes a nice setup for running OctoPrint, Klipper/etc. You will need some M3 socket head screws and nuts (DIN912) for securing the lid to the case (6x 6mm…
I designed my own case for Klipper / Klipperscreen with the following components: Raspberry Pi 4B OSOYOO 5" DSI touchscreen Geekpi Raspberry PI Aluminum Heatsink 4x M3 16mm flat head screws 2x M3 16-12mm button head screws 2x M2.5 screws…
If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…
WORK IN PROGRESS This is a fan housing that holds one or two 120mm x 25mm fans. Five choices of Air Directors Two sizes of base for single or double fans Adjustable direction on the two smaller tops Three sizes of ring (Dyson) style tops…
…Please be sure to hit like & post a make, I'd love to see your prints! UPDATE: Model for BTT TFT50 PI SCREEN V2.1 ADDED!! LATEST VERSION!! IMPORTANT NOTE!!! The newer V2.1 screens have 3 buttons instead of a switch & brightness wheel.…
Arduino code on GitHub: https://github.com/SRRychter/Cloud.git
This is a remix from the project https://www.prusaprinters.org/prints/39449. The goal was to mount an Raspberry Pi 4 directly on the frame of the Prusa i3 MK3S+ a look alike. As per previous made version the case is small and as compact…
Bedside lamp, a matching ceiling lamp is in my profile. I created a lampshade based on the Zuzanna Lamp by LeFabShop, as i liked the idea but wanted something with a little bit more hight for a ceiling lamp. Translucent if printed with…
I modified the inlet of my USB version of this, using the CAD model provided by Waveshare. This requires the Pi be mounted separately and connected with an extended length ribbon cable. You will need to auto generate supports, as the…
Stylus for Nintendo dsi XL I couldn't find it anywhere so I remixed a 3ds stylus so it would fit the dsi XL The tip might need a bit of sanding to make it compleatly round Print at a thin layer height like .1mm and 100% infill for best…
Chess Dubrovnik Set - mod easy-print Kingsize 3.75" (FIDE) (for a board with 2x2 inch / 50mmx50mm fieldsize) Chess #Dubrovnik #Staunton //////////////////////////////////////////////////////////////////////////////// The set - except of…
A bookstand to go on your bedside table that holds the next five books you are planning to read. What shall I read next? Easy to print with no supports @3DPrintBunny
5 inch Touchscreen and Raspberry Pi Case for mounting to Creality Ender 3 V2/S1/S1Pro (and possibly others) This replaces the stock screen on your compatible Ender series printer. This allows a 5" DSI TouchScreen and Pi 3b/4 to mount to…
I had to make a bedside table for my wife, but she didn't think it would work with a 3D print. So here it is. In the picture I printed a special version just for a magsafe charger, but there is a clean version included, and a STEP-file.…
Fits ideally over beds with a 22mm edge.
Bedside table sized for Sylvanian Families or Playmobil. Designed to fit with my bed & bunk bed . The book can be found at PrusaPrints The cartoonish alarm clock in the picture can be found at Thingiverse Read more about ongoing work at:…
BOM: Waveshare 5" DSI screen 2 x M2 self-tapping screws 2 x M3*12 BHCS or SHCS 2 x Heatset Insers (M3x5x4) Print the 3 parts and assemble according to the images. The parts are all in the proper orientation for printing. If printing the…
OVERVIEW This is the first prototype of a series of furniture pieces developed around a “construction kit” philosophy, in which printer-sized components can be simply assembled with minimal experience to create customised furniture…
The tablet i was using to control my Klipper system died. I picked up a 7 inch Waveshare LCD on amazon, linked below, and built a mount to attach it to my printer enclosure. https://www.amazon.com/dp/B096KL11X8
This is a minimalistic hanger for epiphytes, such as Tillandsia and other air plants. Assemble three identical arms by securing them with the two caps (see picture). Given the right tolerances and print quality, press fit eliminates the…
Chess Dubrovnik Set - mod easy to print Kingsize 4.96" (for a board with 70mmx70mm fieldsize) Chess #Dubrovnik #Staunton /////////////////////////////////////////////////////////////////////////////// The set - except of the knight - is a…
There is simply not a good charging option for the DSi other than with the cable that it shipped with. And Charging Docks for the DSi are a bit rare these days. So, I made my own one. and probably there is someone that is also needing…
A small bedside shelf to hold glasses, pods, watch etc. The shelf is telescopic and is secured by the weight of the mattress. Prints easily with no supports Comes with 2 trays one solid and one with a hexagonal mesh base. Loads more…
I wanted the bedside table catchall from the thumbnail of the catchall contest, but it didn't seem to exist, so I made it! A few small modifications to fit the shelf in my headboard, and a spot to put spare change, or in my case, earplugs…
This is a simple mount to install a Waveshare 5" DSI Touchscreen to your Prusa Bear 2.1. To use it, you require: 1x Screen 1x Raspberry Pi 3B(+) or 4B 4x M3x10 screws Mount the Pi on the Screen without the standoffs. Carefully make sure…
Suitable for air plants with diameter of about 40mm. Created this model as a refernce for wire bending and cutting (the frame on the right). Included the CAD file for you to edit to your suitings. Print Settings Printer Brand: Anycubic…
This box supports following components: Raspberry Pi 4B Waveshare 4.3" DSI display ( https://www.waveshare.com/wiki/4.3inch_DSI_LCD ) Noctua 40mm 5V fan - NF-A4x10 5V PWM 1-channel relay (unfortunately not exactly a typical one:…
Simple bracket for the Fitbit Sense to sit between the bedside table and the bed without any wires. Charger clicks into place with USB cable going out bottom and the bracket has a built-indentation for “Medium” 15x60 mm 3M Command…
My daughter sleeps in a High bed, and therefore hasn't any nightstand to put the alarm clock. So I made a small shelf that fits on the sideboard of the bed. I printed in PLA but split the piece in half and then glued, just to prevent…
Case for Pi3B+ with 5inch DSI display. May work with other Pi models, but I don't have the equipment to try it out. Hardware required: 6x 8x5mm magnets. You could get away with 4 magnets too. 4x M2.5x10mm screws, or use the 2 provided…
A case for the waveshare 5inch touchscreen with a raspberry 4 and a super slow fan for cooling. I used this screen: https://www.amazon.de/gp/product/B08H23KB1G/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 There you can connect the…
Printed in two sections not requiring support, with interference fit that also negates glue. I printed the example at 0.28 layer height with two walls and 20% infill. I think it would be better at 0.20 layer height with four walls. Later…
WARNING Use flush cutters to cut out a piece of the “Cover” that presses against the SD Card. When modelling this i did not account for the SD Card protuding, so the cover will press against it and that can break the SD Card Slot.…
A display stand to show off your DSi XL / LL not the display stand.
Yoto Player Holder that fits over a standard bunk bed frame. I printed in PLA+ at 50% infill. Unfortunately, support is needed to print the lip which goes over the bed. Even with the support and 50% infill, though, this printed in about 1…
I designed this to so that the Waveshare 4.3 inch DSI capacitive touch screen could be mounted to a Voron Switchwire. This drops about 15mm lower than the bottom of the skirts, so you will need some clearance. The housing mounts to the…
This is WIP! I'll post more links and instructions soon. this case was designed to for my raspberry pi 4 and Osoyoo 5 inch screen to my Creality ender S1 printer (on the front left side) to run Klipper with Klipperscreen on it. Buy me a…
A stand for a Waveshare - 4.3 inch DSI Touchscreen It has a tight fit, requires decent bridging capabilities of your printer and should not be printed above 0.2 layer hight due to the overhangs. Edit: I'm not really proud of the…
A display stand to show off your DSi not the display stand.
Protective case for Nintendo 3DSXL and DSiXL handheld with self-adhesive foam on the inner walls (2x 1mm).
Bedside shelf that fits 3cm boards in the base version. Please ask for a fitting model for your bed board size. The phone holder slot is 18mm wide and should fit most phones even when using thick casings like the leather one shown in the…
1:6 scale bedside table. suitable for barbie sized dolls, or other dolls that fall in the 1:6 Fashion/Play scale. Model designed to be printed with no supports, and fitted together once printed and painted to your liking. Other 1:6 scale…
HO Scale roadside Billboard just add a picture to the front My source of Model train things RailGoose.com Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament:…
Simple fully customizable bedside organizer for holding gadgets, from one phone to a whole family of gadgets. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.3mm Infill: 20% Category:…
This model is compatible with the lego system.
Not an original design. I saw something that was way overpriced and thought i can recreate it with what I had on hand. This light is shaped like a house. Where you can rest your book face down to make a roof holding your page where you…
MAG-DOCK PULSE Bedside Mag Safe Charger Stands for iPhone standby mode. There are currently 4 versions to choose between, depending on the charging puck you currently have. Mag-Dock Pulse - Iphone NEW Puck - for use with the new charging…
I needed a case for our pasivly cooled Octoprint servers to protect them from short circut by tools laying on a table. Often I have found metal objects under RPis very close to pins. This should solve it. For assembly you need 4x M3x8 and…
Original design by falken_gt4. Thank you for sharing. Osoyoo 5" touch screen https://www.amazon.co.uk/dp/B07KJBCNS8?ref=ppx_yo2ov_dt_b_product_details&th=1 I added an insert to the front as well as re-sizing the enclosure to accomodate…
OpenPill Mini casees modified to accommodate smartcard hat. There are a number of different models and what you need will be dependent on both the cardslot(s) that your reader hat has as well as how you have connected it, Stacking Header…
A small shelf that fits perfectly as a bedside table for the Ikea Småstad loft bed. The model include the base and a border that you glue on top so that things don't fall down. There are models for a left- and a right hand shelf depending…
Just adding hole in the bottom so it would install / detach easier without flipping the printer
Blank 21x21 Compact SeedQR Bitcoin private key, used as a backup for a 12 word seed, with SeedSigner, Krux and Jade Wallet Painted with Staedtler permanent markers https://github.com/SeedSigner/seedsigner/tree/dev/docs/seed_qr designed by…
A rugged box for your Nintendo 3DS/DS/DSi games. Holds up to 24 cartridges without optional inlays, or up to 48 with. 6x M3x30 screws/bolts required for assembly. Straight from the printer, the inlays fit very tightly, and can be hard…
New: Remotes_Plus_Phone_Holder_V1 [ OnShape Model ] Holds 3x remotes + phone Extra mounting point at the bottom Remotes_Holder_V3 [ OnShape Model ] + Chamfer to support top bevel printing + Better transition between basket and top
This is a bedside corner shelf designed particularly for those with cabin beds or similar, making a traditional bedside cabinet impractical. It has two shelves and a slot designed to hold a kindle. There is cable routing to both shelves…
I loved the idea of using Octoprint along with a UI accessible from a touch screen. Though, all available solutions I found for the front panel are considering touch screens using Raspberry Pi’s GPIO interface. For me this was…
This is a protective sheel for the SeedSigner Open Pill enclosure. It has a fairly tight locking mechanism, but can still be opened by simply pulling the top part. It fits the original Open Pill enclosure, but it is particularly designed…
since I couldn't find a printable shell for my dsi I decided to make one myself top cover slides in from the top of the screen (SCRATCHES ON YOUR DSI COULD AND MOST LIKELY HAPPEN) bottom cover is put on from shoulder buttons first (SD…
Reuploaded from: https://github.com/SeedSigner/seedsigner/tree/dev/enclosures/open_pill_mini_w_coverplate Support the project creator by buying on their store: https://btc-hardware-solutions.square.site Photos sourced from community…
This model is compatible with the lego system.
A simple Nintendo DSi XL Skadis mount
If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore Our stands come in 2 varieties, stand and kit. The Stand…
DSI Stylus designed to print without supports. It has a shallower angle on the tip to allow it to print nicely without needing support material. F3d file available.. If you want to tweak, let me know and I will upload it too.
This is a 23cm x 21cm storage container for your home or office. I designed it to keep my stuff from falling off my nightstand. It is adaptable if you would like to make changes to fit your lifestyle. Updated: I added a smaller version…
I bought my P3 steel frame back in 2015. It is the non XL version that supports a mk3 heat bed. It was also the one that didn't support t8 lead screws directly. There is a bearing holder out there that converts it and I've designed the…
Case for SeedSigner cold wallet. The same as the Rugged Pill , but with rounded buttons. Many thanks to the author of the original model. Carefully watch tutorial video for the default Rugged Pill assembly before start:
Xiaomi camera C300 bedside holder layer height: max 0.2 mm material: PLA, PETG, ASA/ABS Print with supports if the bed frame is too narrow, you should add felt pads. Feel free to remix
A simple 25x25 Compact QR for Seedsigner including a case with a sliding lid for sealing. Dimension Plate: 80x80x6mm Any ideas for improvments are welcome! Printinfo: Used wallgenerator “Arachne”
About: This is catch all tray I designed with some patterned sections. Alot of the other trays seemed kinda jank or bland so I wanted to see if I could do better. The tray itself has 3 flat slots for keys, wallet, sunglasses, etc. and in…
This model is compatible with the lego system.
Yes officer, it's a gaming console, obviously. The gaming Pill is a derivative of the Rugged Pill and intended for use with the Zerocam. Print with 0.2 mm layer height and 2 perimeters for best results. There is no sd-card slot, so insert…
A Table that fits the old Malm Bedframe (50*75mm). Prints on the Side without Supports, scale Z to your personal preference.
This is the broadsider from fallout 4. This is life size scale sorry for the size. This is one of the Props from the #games2life project for 2023. if you This model did not get completed so I am publishing it early. photos of the…
This is a 3D model of a moon lamp cover that is designed to fit over a Xiaomi bedside lamp. It is made of PLA filament and has a realistic texture and color of the moon. It has two versions: one with a hole at the bottom for the cable and…
Update 2026-08-06: Added Empowered Token Update 2026-09-01: Added Temporary Token Although the design is similar to my previous models, this model is not compatible with me previous tokens. All relevant tokens are now recreated for this…
Waveshare 5'' DSI LCD Mount for RatRig V-Core 3030 Frame or any 3030 Frame. You will need all printed parts and this nut and screws: 4x M2.5x10mm or 4x M2.5x8mm cap head screws 4x M3x8mm cap head screws 1x M5x18mm cap head screw 2x…
I did the awesome “clicky-clack fridge door” mod. But the visibility of my screen was partly blocked by the protruding extrusion of the door. So I remixed this model and it worked out great!
![Chess Figure Set Dubrovnik [Kingsize 3.86"] - mod easy-to-print [for a board with 58mmx58mm fieldsize]](https://media.printables.com/media/prints/214964/images/1964918_1f7f8524-10d4-47f4-a17c-7be02bcff904/2022-05-27-20_52_51-window.jpg)
![Chess Figure Set Dubrovnik [FIDE-Kingsize 3.75"] - mod easy-to-print [for a board with 2x2 inch / 50mmx50mm fieldsize]](https://media.printables.com/media/prints/214978/images/1965082_cc5a580a-e284-46ab-90c4-bd1b3406c6e9/2022-05-27-20_52_51-window.jpg)
![Chess Figure Set Dubrovnik [GIANT - Kingsize 4.96"] - mod easy-to-print [for a board with 70mmx70mm fieldsize]](https://media.printables.com/media/prints/214927/images/1964582_f2626a6b-a6d4-47c0-bf33-d747f950b9fc/2022-05-27-20_52_51-window.jpg)
