1 / 3
Timegrapher
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIY Timegrapher with Microphone Amplifier
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 46
- Makes
- 0
- Views
- 400
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This timegrapher uses M3 and M4 threaded inserts, as well as the bolts. You can see where each one is located in the CAD model.
The electronics are made with a small punched card, and I use a 9V battery to operate it.
I didn't develop the electronics, but you can find information about them by searching the watchoscope website. I tested it, and it works; just be careful with the connections.
I'm sharing the CAD model in case you want to improve.
Supports:
Si
Resolution:
0,10mm - 0.30mm depending on the piece
Infill:
15%
Filament material:
PETG
Nozzle:
0.4mm