Timegrapher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY Timegrapher with Microphone Amplifier
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This timegrapher uses M3 and M4 threaded inserts, as well as the bolts. You can see where each one is located in the CAD model.
The electronics are made with a small punched card, and I use a 9V battery to operate it.
I didn't develop the electronics, but you can find information about them by searching the watchoscope website. I tested it, and it works; just be careful with the connections.
I'm sharing the CAD model in case you want to improve.
Supports:
Si
Resolution:
0,10mm - 0.30mm depending on the piece
Infill:
15%
Filament material:
PETG
Nozzle:
0.4mm