Wineglass lamp (two materials)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my interpretation of a modern 2-material lamp.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 77
- Makes
- 0
- Views
- 543
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Here you can see my creation of a lamp made of 2 different materials. A wine glass inspired me here. Once an opaque material (Prusament Galaxy Black) and once made of a transparent material (Prusament PVB smoky black).
I think it has become a modern lamp. This fits any holder for an E27 LED lamp. I used the ones from Ikea here. The opening on the lampshade for attachment is 41.5mm and the opening for the lamp bulb on the bottom is 97.98mm.
Print preparation
Use the filament change function on the right where you can view the layers of your lamp.
Then go to layer 259 and height 51,80mm and press the small + to add a filament change.
Now you can simply print the lamp as described below and the hints.
Print description
In principle, you do not need any support for printing. Simply place the top area
as in the picture above on the hotplate.
Filament: opake PLA for the first bottom parts, transpartent PLA or PVB for the top part
Layer thickness / mode: 0,2mm
Infill: no
I wish you a happy print and I am happy about your experiences!
I'm curious which combination of materials you choose, take a picture and upload it!
Greetings LPS