1 / 8
$60 Newtonian Telescope 4.5inch 114mm — image 1
1 / 8

$60 Newtonian Telescope 4.5inch 114mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My Newtonian Telescope design featuring a 4.5inch 114mm mirror shown here with a 900mm focal length. Super simple to…

Rating
0 / 5
Likes
35
Downloads
136
Makes
0
Views
1,750
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

My Newtonian Telescope design featuring a 4.5inch 114mm mirror shown here with a 900mm focal length. Super simple to build and designed with so many adjustments there are no mistakes you can't compensate out of the system. Uses very little filament and only commonly available fasteners. Includes an integral arca swiss plate for mounting on a tripod or peak design capture clip.

Parts list

Adjusting

The design includes a M42 threaded plate for a focusing mechanism. You could do without this by attaching your optics directly to the side of the telescope and focusing by adjusting the front nuts to move the secondary mirror back and forward. I've also included a small split socket (nutdriver.stl) to make adjustments less tedious as you build the telescope. The main mirror should be glued to "pivot.stl". It can then be aimed using the three bolts on the back of the mirror mount. "Pivot.stl" is best printed in TPU for compliance but PLA should also work.

Category: Physics & Astronomy

Tags