1 / 5
VW Sharan 7N – Dashboard Mount for ALPINETECH 11.5” CarPlay Display — image 1
1 / 5

VW Sharan 7N – Dashboard Mount for ALPINETECH 11.5” CarPlay Display

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clip-in dashboard mount for ALPINETECH 11.5” CarPlay Display in VW Sharan 7N – no screws needed

Rating
0 / 5
Likes
4
Downloads
68
Makes
0
Views
594
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Public Domain

This is a custom dashboard mount for the ALPINETECH 11.5” CarPlay Display (Amazon link) designed specifically for the VW Sharan 7N (2010–2022).

It allows you to mount the display securely without any screws or adhesive — simply clip it into place.
The holder fits perfectly behind the dashboard trim and grips firmly once installed.
It can be installed in a few minutes by removing:

  • the upper dashboard compartment (just a few screws), and
  • the trim panel around the radio and air vents.

No modification of the car is required.

⚙ Versions

There are two variants included in the design:

Clip version with holding tabs (“Nasen”) – firmly snaps into place for a clean look.

Rounded version with hole – compatible with the existing half-sphere (ball-mount) system used in many phone or display brackets.

Both versions are fully parametric in OpenSCAD, so you can adjust dimensions to your own setup if needed.

🧠  Design Details

Modeled entirely in OpenSCAD using parametric curves and smooth transitions.

The design consists of a dashboard clip, a mounting arm, and an optional socket section for ball-mount systems.

No screws, glue, or additional parts are needed.

🛠️  Printing Instructions

Material: PETG (recommended for temperature stability in the car)
Layer height: 0.2 mm
Infill: 40–60 %
Supports: Minimal, only for inner curves
Orientation: Flat side down

PLA also works but may deform in hot cars — use PETG, ASA or ABS for long-term stability.

🧮  Customization

All parameters are defined in the OpenSCAD file:

You can easily adjust:

  • the curvature of the clip,
  • the thickness or height of the arm,
  • and the socket geometry for your ball-mount system.

Just edit the .scad file and render your own variant.

🚗  Compatibility

Tested on VW Sharan 7N (2015)
Also fits Seat Alhambra and Ford Galaxy dashboards with similar geometry

💡  Notes

Installation and removal take less than 5 minutes.
The part holds the ALPINETECH display firmly even on rough roads.
No visible damage or marks on the dashboard.

🧑💻  Credits

Designed and modeled by Michael Wiedau, October 2025
Software: OpenSCAD + smooth_prim.scad
License: MIT License

Tags