Deepcool Assassin IV 4 fan duct for Jonsbo D32 Pro PC Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a modified fan shroud for Deepcool Assassin 4 cooler, now it become an intake duct with a proper notch to mount it
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 40
- Makes
- 0
- Views
- 719
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
It's a modified fan shroud for Deepcool Assassin 4 cooler made by Skagger. Now it is a back side (intake/exhaust, your choice) fan duct, you can split it and resize it in Z dimension with Fusion to fit your PC Case, it's 66mm to fit Jonsbo D32 Pro. Other changes i made was adding 4 notches — made identically to the original, to my best ability — to make it mountable to the back side instead of the original notchless design which intended to fit the front side — well, with the help of the included fan bracket.
I printed it in white, my experience :
- For durability reasons, you may print it with PLA+ or better, PETG especially if you set it up for exhaust.
- For cosmetics reasons, PLA+ Fits better in matteness but not in whiteness, it's slightly cooler than the A-IV itself, PETG fits the color better but it's glossier.
- For a black A-IV, cosmetically i suggest you experiment it yourself, but durability wise i suggest the above.
I added the notch file, in case you want to modify it. i suggest to taper the slot a little bit towards the top (base to rounded head), and maybe make the feet's angle more acute (longer) so that it probably won't need any support. Printed as is, it's gonna took 100gr of PLA+.