35 models
I replaced DeepCool CH160 glass panel with this design which replicates the 3.5mm squares on the rest of the PC case. I printed this on BL P1S and split the print down the center. I added butterfly clips which are used to keep the two…
Assassin IV gotta be one of my most favorite CPU air coolers, and while it looks and performs great in stock config, I don't mind having more fans. The bracket that comes with it works, but it detracts from its appeal. So, I've designed…
The adapter is printed as four identical parts . Two of them must be mirrored before printing. After assembly, you end up with one adapter per CPU socket corner . Printing Quantity: 4 parts total Mirroring: 2 normal + 2 mirrored Result: 4…
This honeycomb front panel gives your PC-case higher airflow than the standard glass-panel.
I wasn't happy with either the looks, or airflow of my DeepCool CC360 PC case, so I designed this replacement. No glue, or screws are required for assembly. The front plate is made of 2 halves. Each of which is made of a 3 piece…
GPU Holder for DeepCool Matrexx 50 PC case. Rafts: No Supports: No Resolution: 0.2 Infill: 20% Parts: 2x M3 bolts
Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…
Meu primeiro modelo então haverá falhas, caso queiram fazer melhorias fiquem à vontade. tentei fazer uma textura mesh mas não consegui e nem furos para parafusar, caso consiga eu adoraria. Fiz aberturas para imãs de neodímio 6x2 mas não…
use m4 heat threads (D6xL8) Use with cooler fans of the 9225 series
I built a PC using the Deepcool Matrexx 50 case with RGB fans ( https://www.canadacomputers.com/product_info.php?cPath=6_1937&item_id=139452 ) , and noticed there was a large open space on the top of the fan bank on the front. Did not…
A 3-pieces kit to properly mount your BC250 into a DeepCool CH160 Plus PSU relocated to the bottom of the case 120mm or 140mm fan installed right in front of the BC250, pushing fresh air directly to the VRM and PSU connectors Active VRAM…
These are basic feet meant for the cool Deepcool CH160 case where you can make it stand. Multiple designs are available. Express your own base design at this link
This spacer is meant to increase the airflow into the pc case while allowing the white front panel to stay on. Super quickly modelled and can definitely be improved, but it works for me.
3D Model: DeepCool AN600 Adapter for AMD BC-250 This 3D-printable mounting solution allows the installation of a DeepCool AN600 cooler onto the AMD BC-250 motherboard. Installation Hardware: Bracket Requirement: This adapter is designed…
It's a modified fan shroud for Deepcool Assassin 4 cooler made by Skagger. Now it is a back side (intake/exhaust, your choice) fan duct, you can split it and resize it in Z dimension with Fusion to fit your PC Case, it's 66mm to fit…
This is a lower profile fin stack cap to replace the original cap on the Deepcool AK400 CPU tower cooler. Using the AK400 in a Cooler Master NR200 case, I found that the pre-installed fin stack cap adds an extreme amount of unnecessary…
A custom top cover/faceplate for the Deepcool AG400 and AG400 MAX CPU(may fit others) air coolers. It fits securely over the top of the heatsink while maintaining full airflow and fan performance. Features: Precision-fit dimensions for…
This is a front panel for your Deepcool Tesseract case. The only functional thing it provides is the capacity for 3x 120mm fans or a 120mm / 240mm / 360mm water cooling unit. It also looks somewhat good, especially with inlet cones . You…
Specifically for use in the DeepCool Matrexx 50. Use two case screws to attach the bracket through the SSD drive holes location as shown in the pictures. Its a good case for the money, but the screw holes strip out easily, and the back…
Cooler cover for DeepCool AG300 to look less ugly :D NO SUPPORTS LOGO FACE DOWN MADE FOR THIS DUDE
A standoff for the DeepCool MaCube 110 that allows you to ditch the plastic air-restricting mounting plate. Printed setting don't matter too much, just make sure not to use excessive infill so the peg can slot into the case by bending and…
Wanted to remove the semi-infinity style RGB cover for my AIO pump on my DeepCool LT520 AIO in my testing PC, so I measured out and designed a simple pump cover. Deepcool has a proprietary AIO pump from what I researched, so it may fit…
I created this No Face decoration plate for a spirited away themed pc. It fits on a DEEPCOOL GAMMAXX GT tower cooler. The cooler has a RGB light under a metal plate. Just unscrew top metal plate and replace. All of the colors are…
A cover for the deepcool LT 720 water pump with the commodore logo. I printed the commodore symbol with transparent PLA. Attention: You have to use the original bracket, so you have to disassemble the original cover. There are 2 versions…
Cable management hole covers for the Deepcool Macube 110 (and other deepcool cases)
This 3D model is a custom-designed top cover/faceplate for the Deepcool AG400 and AG400 MAX CPU air coolers. It fits securely over the top of the heatsink while maintaining full airflow and fan performance. Features: Precision-fit…
This is a clip for keeping the tubes parallel for a DeepCool LS720 AIO cooler. I believe it would work for any AIO tubes with an outer diameter of approx 12.5mm. Printed with PETG.
Make your own custom base panel for your lovely CH160 case. Basic design available here. You will need to enable support for the open panel base to avoid excessive sagging.
MAIWO40Gbps + Deepcool CK-AM209 passive cooling radiator mount printable no support. I made it.
Base verticale pour boitier PC Deepcool CH170 ou CH160. Ce model permet une meilleure ventilation, ici il y a des prises d'air sur chaque face, vous pouvez également ajouter un filtre à poussière (ou a objets si vous avez des enfants) que…
I picked up a DeepCool Gamer Storm cpu water cooler at the thrift shop that was missing the mounting brackets so I made these. I installed them and ensured proper alignment but unfortunately the water cooler didn't work, so I couldn't do…
Vertical base for the CH160. Dovetail mounting allows you to customize the base to suit your needs—different colors, plastics, etc. Sockets for 5x2mm magnets Various wall configurations: “closed” and “open.” Attention: You may need a…
Hi! I got my cooler used, so i threw this bracket together. The foto looks diffrent because i didn't bother putting newer version on.
