DeepCool Gamer Storm cooler block to LGA1200 mounting bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brackets for a DeepCool water cooler block to mount to an LGA1200 or any similar socket with 75mm x 75mm mount
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I picked up a DeepCool Gamer Storm cpu water cooler at the thrift shop that was missing the mounting brackets so I made these. I installed them and ensured proper alignment but unfortunately the water cooler didn't work, so I couldn't do any long term testing.
The slots for the m3.5 nuts are slightly oversized. The nuts drop in easily but don't hold themselves in, so I would recommend attaching the brackets to the cooler first, then to the motherboard. I would tweak this to be a friction fit, but I dont want to sink any more time into this project.
Printed at 0.2mm layer height, tree supports, 15% infill, and triangles infill pattern. I also enabled ironing on all top surfaces, not necessary but I think it cleans up the part nicely. Here are the Ironing settings I used if you decide to do the same:
Ironing type: All top surfaces
Ironing pattern: Rectilinear
Ironing speed: 60mm/s
Ironing flow: 20%
Ironing line spacing: .15mm
Ironing angle: 90
Not sure how useful this model will be since this is an older water cooler, but it could be easily modified to fit other coolers.
